Rockit Firmware 1.12

Rockit firmware 1.12 is available. The changes are mostly limited to MIDI. I’ve implemented a soft MIDI Thru. Messages not intended for Rockit, meaning on a different channel, are passed through to the MIDI Output. The MIDI channel can now be changed. To change the MIDI channel, hold down the Select button until the display starts flashing. Then, use the Save and Recall buttons to change the MIDI channel. Finally, hold down the select button until the display stops flashing and that’s it. Otherwise, I fixed a bug that caused the audio to stop when the arpeggiator was running and drone mode was entered. That’s about it. Some other transparent changes were made for an improvement in the number of clock cycles required to perform various tasks. Have some fun and let me know if you find any funny business going on. Download the hex file here.

20120421-094532.jpg

Hackme at maker faire

All set up at maker faire. Come on down and make some racket with Rockit and Sprockit!

Rockit Version 1.11

Some of you enterprising Rockit users came across some bugs in the the 1.1 code. I listened and have now fixed them. There was a bug in the pitch bend code that caused some screwy behaviour. I also made some more improvements to the filter envelope behavior. I think I’ve found the perfect filter envelope speeds. At the same time, I found a better value for a couple more resistors. R75 and R76 are going to be 18k from here on. This reduces the maximum filter resonance but it kind of had to come down a little since the level going into the filter from the VCA had been increased. It’s not 100% necessary, but I think it makes a worthwhile improvement. You can download the new code here.

Rockit Software Version 1.1 and Hardware Hacks

I’ve been hard at work on Rockit’s firmware and am proud to put out Version 1.1. There are a number of improvements, bug fixes, and a new feature. I’ve also made a few adjustments/hacks to resistor values which greatly improve Rockit’s sound. Click through for a list of the software and hardware updates.Continue reading

Rockit Case is Finished

The Rockit case is finally finished. I got the third and final prototype of the Rockit case in, put it together, and did the happy dance. I’m going to make some small adjustments for the production order, but nothing that will require another round of prototypes. I’m going to put up the case for pre-sale today. I need to hit a threshold of about 50 orders in order to buy it. The lead time from the laser cutter is three weeks, so these should ship in February. The cost will be $50. Click through for more pictures.Continue reading

Rockit Time-Lapse Video

Check out this Rockit assembly time-lapse video! Big thanks to its maker, Siempre La Luna.